Background
Updated 30 June 2026
Ā© Crown copyright 2026
This publication is licensed under the terms of the Open Government Licence v3.0 except where otherwise stated. To view this licence, visit or write to the Information Policy Team, The National Archives, Kew, London TW9 4DU, or email: psi@nationalarchives.gov.uk.
Where we have identified any third party copyright information you will need to obtain permission from the copyright holders concerned.
This publication is available at /government/statistics/air-quality-statistics/background
Accredited Official Statistics
Air quality statistics in the UK, 1987 to 2025 - Background
Updated 30th June 2026
1. Why measure UK air quality?
Air pollution is a local, regional and international problem caused by the emission of pollutants which either directly, or through chemical reactions in the atmosphere, lead to negative impacts on human health and ecosystems.
There are many sources of air pollution, including, but not limited to, power stations, transport, household heating, agriculture and industrial processes. The provides estimates of the amount of different pollutants that are emitted to the air each year from human activity in the UK. However, the relationship between emissions and concentrations of air pollutants is not straightforward. Three main factors can have large, complex effects on air quality: weather, transboundary movement and secondary formation of pollutants (described below). As a result, it is important to measure ambient air quality, in addition to quantifying emissions. A more accurate picture of air quality in the UK aids the development of strategies to reduce air pollution from human activities and thereby helps reduce the impact of pollution on public health and the environment.
This publication covers UK concentrations of the following key pollutants thought to have the greatest health and environmental impacts resulting from exposure:
Ā· nitrogen dioxide (NO2)
Ā· particulate matter (PM10 and PM2.5)
Ā· ozone (O3)
Ā· sulphur dioxide (SO2) (only included when measuring the number of days when air pollution reaches moderate or higher levels, please see the āModerateā or higher chapter for more detail. This is because measurements of SO2 using UK monitors are not representative of air pollution across the whole UK area since SO2 monitors are strategically placed next to point sources such as factories. Concentrations of SO2 are very low across the UK, which reduces the requirement to monitor concentrations of this pollutant.)
Please see the links at the bottom of this page for the statistics calculated for each pollutant.
2. The effects of air pollution
Air pollution has negative impacts on human health and the environment. For example, long term exposure to particulate matter contributes to the risk of developing cardiovascular disease and lung cancer. Particles can be inhaled and penetrate into the lungs. The smaller the particles, the deeper they can penetrate into the lungs and therefore health impacts are more strongly associated with the smaller PM2.5 fraction. As well as being emitted directly, particulate matter can be formed in the atmosphere from reactions between other pollutants, of which NO2, SO2, Non-Methane Volatile Organic Compounds (NMVOCs) and Ammonia (NH3) are the most important. More detail on the health impacts of other pollutants is provided within each pollutant section of this release. For more information about the effects of NH3, NMVOCs and SO2 see the relevant section in the latest emissions of air pollutants in the UK statistical release.
In order to better inform the public about short-term levels of outdoor air pollution and their potential health effects, the was developed following advice from the . This index, numbered 1-10, standardises the measured values of different pollutants by categorising them into 4 bands (āLowā, āModerateā, āHighā, and āVery Highā). These bands are linked to the perceived impacts on health of each pollutant. As such, the DAQI provides information about the health risk of different levels of pollutants in a simple and comparable format and is similar to the sun index or pollen index used in weather forecasts. Measured values of the different pollutants should not be directly compared as their effects on health and the environment are very different.
Air pollution also damages ecosystems through:
Ā· acidification (SO2, NO2 and NH3) - where chemical reactions involving air pollutants create acidic compounds which when deposited on land and aquatic systems can cause harm to soils, vegetation and buildings.
Ā· eutrophication (NO2 and NH3) - where nitrogen can be deposited in soils or in rivers and lakes through rain, affecting the nutrient levels and diversity of species in sensitive environments, encouraging algae growth in lakes and water courses, for example.
Ā· ground-level ozone (NO2 and NMVOCs) ā where chemical reactions involving NO2 and NMVOCs produce the toxic gas ozone (O3) which can damage wild plants, crops, forests and some materials. Ozone is also a greenhouse gas contributing to global warming.
3. The links between emissions of air pollutants and air quality in the UK
While reducing UK emissions of air pollutants helps reduce atmospheric concentrations in the UK, the level of reduction in atmospheric concentrations is not always proportionate to the reduction in emissions.
Weather conditions can greatly affect local concentrations of air pollutants. For example, ozone is formed in the presence of sunlight. Changes in wind speed or direction can influence dispersion with settled conditions generally resulting in higher levels of ambient air pollution.
The transboundary nature of some pollutants is another factor that contributes to the disconnect between emissions and concentrations. For example, emissions of the pollutants that lead to ozone formation have reduced considerably in the UK, but this is not reflected in the long-term trend in ozone concentrations. This may be partly explained by a proportion of the ozone experienced in the UK originating from releases of precursor pollutants that are transported across from mainland Europe and trends in global hemispheric background ozone concentrations.
In addition, secondary formation of pollutants may occur, contributing to final pollutant concentrations measured at a location. For example, primary emissions of ammonia can react in the atmosphere with other substances to form secondary emissions of particulate matter.
Local factors such as proximity to pollution sources also partially explain differences in trends between emissions and concentrations of air pollutants. For example, emissions of nitrogen oxides at a national level have been decreasing in the long-term, however at some roadside locations corresponding decreases in nitrogen dioxide concentrations may not be observed because of significant local emissions of nitrogen oxides.
Restrictions related to the Coronavirus (COVID-19) pandemic in 2020 and 2021 influenced emissions of pollutants from many sources, in particular road transport, when volume of traffic was reduced significantly. Overall, emissions of air pollutants were mostly lower in 2020 and 2021 than in 2019. This in turn influenced the concentrations of pollutants, although, as discussed above, the level of reduction in atmospheric concentrations is not always proportionate to the reduction in emissions.
Defra produces Accredited Official Statistics annually in February on emissions, which are estimated by combining the amount of pollutant emitted from a certain activity with estimates of the duration of that activity. These statistics analyse national levels and trends in emissions. The latest emissions estimates for the UK can be downloaded from the .
For further information on air quality data and information, please refer to the air quality and emissions statistics °Ēøē³Ō¹Ļ webpage.
4. Compliance with air quality limit values
The (AQSR) outline the air quality target values, long-term objectives and legally binding limit values for concentrations of major air pollutants that impact public health in the UK. For the protection of vegetation, critical target values and levels are also provided for ozone and nitrogen dioxide (not including urban areas), respectively, although these are not legally binding.
The UK is divided into 43 zones for air quality assessment which includes 28 agglomeration zones (large urban areas). For each zone, limit values apply to annual mean concentrations of each pollutant covered in this release used to measure long-term exposure, except for ozone for which an 8-hour mean is used to gauge short-term impacts. Similarly, there are additional limit values for daily mean concentrations of PM10 and hourly mean concentrations of nitrogen dioxide. A summary of the air quality objectives and target and limit values used for assessment across all pollutants can be found on the . For historical assessments, please see the .
The air quality data obtained from the statutory monitoring networks is supplemented by modelling and additional low-cost monitoring and is assessed against the air quality target values, long-term objectives and legally binding limit values in the AQSR.
For an overall summary of compliance, see the relevant years in the , published each September.
5. How is air quality measured?
Monitoring data is combined with modelled data for annual statutory reporting of pollutant concentrations to provide data that covers the entire UK. The website provides further information and the most up-to-date data for all air pollutants measured by the AURN, modelling and other monitoring networks.
5.1 Monitoring - the Automatic Urban and Rural Network (AURN)
In accordance with the UKās AQSR, the concentrations of the key pollutants are measured via a UK-wide network managed by the Environment Agency of approximately 210 monitors, with 322 monitors having been set up since the AURN began. This network, the Automatic Urban and Rural Network, captures continuous ambient concentrations of these pollutants on a near-hourly basis. The monitoring methods employed varies by pollutant:
Ā· NO2 ā Chemiluminescence
Ā· O3 ā UV absorption
Ā· SO2 ā UV fluorescence
Ā· PM ā a range of methods - the methods for measuring particulate matter approved by Defra under MCERTS certification are listed on the
In addition to the AURN, in 2020 a was deployed to monitor NO2 concentrations at 177 roadside stations, increasing to 300 roadside stations in 2021. Because historical data does not exist for this network, data from the network are not included in this Accredited Official Statistics Publication.
5.2 Modelling
To complement the data collected by instrument monitors, the UK uses a model to assess air quality where monitoring does not take place.
The CMAQ-Urban modelling system estimates concentrations of each pollutant for each limit value set by the UKās Air Quality Standards Regulations 2010, except for hourly limit values which are based entirely on monitoring data. The modelling system assesses pollutant concentrations across the whole of the UK on a grid of 1km x 1km resolution. In addition, some pollutants are modelled at the roadside of the UKās major urban roads.
Although ratified results from monitoring are available in April, the modelled data are not ratified until September which means the modelled data are not used in this Accredited Official Statistics publication.
6. Monitoring data Quality Assurance and Quality Control (QAQC)
Only Type Approved analysers are currently included in the AURN network, which excludes many monitors used by Local Authorities such as diffusion tubes. Type Approval of analysers is carried out in the UK under the MCERTS scheme managed by the Environment Agency. Type Approval is undertaken in order for analysers to adhere to European Committee for Standardisation (CEN) methods, established to meet the minimum performance requirements based on the Data Quality Objectives in the UKās AQSR. In adherence to the AQSR, monitors also undergo periodic maintenance (e.g.Ā calibration, audits and servicing) to ensure continuation of proper functioning.
Despite Type Approval and regular maintenance, each monitor is associated with a certain degree of error. If capture rates and/or pollutant concentrations are low, negative values may be recorded. Values are only kept if they are greater than or equal to the negative detection limit. This approach is compliant with the on air quality reporting, in line with the AQSR. To help ensure accuracy of Accredited Official Statistics, monitoring data are only included for assessment if the annual capture rate exceeds 75 per cent following the AQSRās Data Quality Objectives. A capture rate of 90 per cent is required for fixed evidence, but a reduction of 5 per cent is permitted to allow for maintenance, and a further reduction of 10 per cent is permitted for indicative evidence. The are published every quarter which includes average quarterly capture rates and reasons for monitor downtime. Uncertainty in measurements is further accounted for when producing Accredited Official Statistics by averaging measurements across multiple stations accompanied by confidence intervals to indicate the range of values around the mean.
Monitors are also sited according to specific criteria outlined in Schedule 1 of the AQSR. Schedule 1 of the AQSR sets āmacroscaleā and āmicroscaleā siting criteria. The āmacroscaleā siting criteria are intended to ensure that the stationās location is representative of the exposure of the population, in the context of the averaging period of the limit values. This includes locations where the highest concentrations are likely to occur to which the public is exposed. As such, the AQSR specifies that all monitoring stations must be in areas where there is public access and/or fixed habitation. Exceptions include monitoring around industrial areas where health and safety at work regulations apply, or around roads where normal pedestrian access is not possible. Based on these criteria, the UK classifies monitor stations according to the type of area (urban/suburban/rural) and the predominant sources of pollution (traffic/industrial/background). The āmicroscaleā siting criteria are aimed at ensuring the station is sampling air representative of its immediate vicinity. For example, the air flow around the inlet must be unrestricted, and the inlet height must be in the range 1.5 ā 4.0m.
7. Local air quality monitoring
In addition to the monitoring networks used for national assessment of air quality, local authorities conduct their own monitoring in accordance with the Local Air Quality Management Guidelines. This guidance is not as stringent as the requirements for monitoring on the national network (although some stations on local networks will meet the national criteria).
Monitoring at a locally-managed level has a large focus on nitrogen dioxide concentrations primarily monitoring pollution using diffusion tubes. This is known as non-automatic monitoring, as data are manually collected on a monthly basis from each station. Many local authorities choose to operate automatic monitoring stations that can measure concentrations of multiple pollutants much in the same way that the AURN operates. Data quality will be variable dependent on station positioning, instruments and techniques used, and quality control procedures.
Locally-managed data are directly disseminated through multiple platforms either on standalone websites operated by the local authorities or on platforms developed to hold local data (examples include and ). In 2020, local data from these networks were introduced to the website to allow users to access both nationally and locally-managed data from one location. This includes the majority of locally-managed automatic monitoring stations.
Locally-managed data are not likely to meet the same quality criteria as data from the national network; however it could be seen as supplementing the high-quality measurements from the AURN by greatly increasing the number of sampling points for air quality measurements in the UK.
8. Limitations of statistics covered by this publication
These Accredited Official Statistics largely focus on mean changes to concentrations in the short- and long-term as measured by the AURN. There are monitoring stations that will differ significantly in pollution levels and trends compared to the national mean. The accompanying tables provide station-level figures for the entire analysis, so that users can construct their own analysis based on the monitoring stations they are interested in. Hourly-measured and/or daily-measured data from each station are available from the website.
Much of the analysis in this publication displays time series for concentrations of air pollutants, but the individual stations that feed into the calculations will change from year-to-year. This may be because old stations are shut down and new ones become operational, or an operational issue with a station meant data capture of 75 per cent was not achieved. Values for each year are broadly comparable as the network is representative of UK air pollution as defined by domestic legislation. Measurement representation may vary across the UK as there are around 300 automatic monitoring locations measuring the pollutants in this official statistic. Nevertheless, monitoring stations that are part of the AURN are spread geographically and according to population density so the impact of changes in siting should be minimal when comparing different years.
Where reasons are given for changes in the level or trend of air quality, these are usually based on correlation with supplementary data on known factors for levels of that pollutant. Other factors may influence the level of air pollution other than those stated; weather effects, in particular, can introduce variability into the time series even when considering annual statistics.
9.Sections in this release
Concentrations of nitrogen dioxide
Concentrations of particulate matter (PM10 and PM2.5)
Methodology for calculating progress towards the PM2.5 targets
Days with āModerateā or higher air pollution (includes sulphur dioxide)